Shop Talk Live - Fine Woodworking

Links from this episode can be found here - http://www.shoptalklive.com   

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter  

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

 


Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Direct download: shop-talk-live-episode-281.mp3
Category:general -- posted at: 10:00am EDT

Vic and Ben discuss life without a table saw, how much room a bandsaw takes up, bench top jointers, and how to be a good Instagram community member.

0:00 - Intro
2:04 - Instragm Trolls
21:15 - Life without a table saw and where to put a bandsaw
55:58 - Small jointer/planer combos and benchtop jointers

Links from this episode can be found here - http://www.shoptalklive.com   

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter   

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited


Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Direct download: shop-talk-live-episode-280.mp3
Category:general -- posted at: 9:15am EDT

Asa Christiana joins Mike and Ben to discuss tool libraries, the best way of fairing curves, and what one listener might be doing wrong with their hand plane.

0:00 - Intro
1:17 - Asa's new book
15:18 - Are tool libraries useful for new woodworkers?
23:03 - Skipping plane problems
30:35 - Segments
42:31 - Fairing a curved surface

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited


Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Direct download: shop-talk-live-episode-279.mp3
Category:general -- posted at: 11:00am EDT

Mike, Anissa, and Ben discuss their favorite plywoods, how flat an assembly table needs to be, Mike's tormek, and corner desks.

0:00 - Intro
4:58 - Flatness of assembly tables
14:42 - Best plywood for fine woodworking
30:14 - What dead woodworker do you want to hang out with?
47:18 - L Shaped Desks
57:58 - How does Mike use his Tormek?

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited


Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Direct download: shop-talk-live-episode-278.mp3
Category:general -- posted at: 10:23am EDT

This episode is sponsored by Titebond. Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited


Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Direct download: shop-talk-live-episode-277.mp3
Category:general -- posted at: 10:46am EDT

This episode is sponsored by Titebond and Shaper

Sign up for PantoRouter's webinar on October 20th: www.finewoodworking.com/webinars

0:00 - Intro
1:39 - Teaching online
13:40 - The important parts of a mortise
31:10 - Using string as a clamp
47:19 - All-time favorite tools
1:03:35 - The piece of wood you don't want to cut

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited


Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Direct download: shop-talk-live-episode-276.mp3
Category:general -- posted at: 1:32pm EDT

Bob Van Dyke joins Mike and Ben to discuss table saw blade sharpening, drill press height, scary router bits coming loose, and his upcoming dovetail bootcamp.

Larissa Huff's Hand-routed Lettering video: https://www.finewoodworking.com/2022/09/16/hand-routed-lettering

Full-length Sam Maloof documentary: https://www.finewoodworking.com/2022/09/21/sam-maloof-woodworking-profile

0:00 - Intro
2:47 - Dovetail bootcamp - https://www.finewoodworking.com/elearning
20:34 - Table saw blade sharpening
32:49 - Drill press table height
43:34 - Segments
1:02:04 - Router bit on the move!

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited


Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Direct download: shop-talk-live-episode-275.mp3
Category:general -- posted at: 10:30am EDT

Links from this episode can be found here - http://www.shoptalklive.com   

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter   

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited


Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

 

Direct download: shop-talk-live-episode-274.mp3
Category:general -- posted at: 10:54am EDT

Mike and Ben interview Joe Hebenstreit and Adi Rao about their work with Shaper—from the early prototypes to their newest offerings, Shaper Studio and Plate.

This episode is sponsored by Shaper.

For more information head on over to https://www.shapertools.com/


Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Direct download: shop-talk-live-episode-273.mp3
Category:general -- posted at: 10:56am EDT

Mike, Anissa, and Ben debate cutting boards and talk about taking box-making skills to the next level, fixing shellac mistakes, and solid-wood door movement.

0:00 - Intro
1:20 - Cutting boards
24:58 - Solid-wood door with kumiko
30:40 - Segments
48:19 - Fixing shellac mistakes
52:24 - Next level boxing

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited


Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Direct download: shop-talk-live-episode-272.mp3
Category:general -- posted at: 10:49am EDT

Megan Fitzpatrick joins Vic and Ben to discuss replacement plane blades, grinding angles, rabbeting dovetails and our first ever (we think) live call in!

0:00 - Intro
1:47 - Replacement plane blades
9:07 - Grinding primary bevels
20:48 - All time favorite tools
33:36 - Adding a rabbet to aid in dovetailing
42:19 - Call in: Antonio asks where he should put his shop

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited


Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Direct download: shop-talk-live-episode-271.mp3
Category:general -- posted at: 10:31am EDT

This episode is sponsored by the Society of American Period Furniture Makers - http://www.sapfm.org

0:00 - Intro
1:46 - Marquetry
24:49 - Crossgrain banding
34:26 - Shaper vs. router table
48:41 - **graphic injury discussion**
57:50 - Dropping wood on the floor on purpose

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited


Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Direct download: shop-talk-live-episode-270.mp3
Category:general -- posted at: 10:56am EDT

Mike, Vic, and Ben discuss how they find information they need to learn a new technique and the impulse buys that they just can't walk away from.

This episode is sponsored by the Society of American Period Furniture Makers and The Northwest Woodworking Studio

0:00 - Intro
2:19 - How do you find woodworking information
41:08 - Segment Potpurri
55:00 - Woodworking impulse buys

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited


Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Direct download: shop-talk-live-episode-269.mp3
Category:general -- posted at: 10:40am EDT

Mike, Barry, and Ben discuss working with thin stock, combination milling machines, chisel handles, and Barry and Ben get a little too close to being fired on air.

This episode is sponsored by Woodcraft and Pony/Jorgensen

Mike Mascelli's video workshop can be found here: https://www.finewoodworking.com/videoworkshop/2022/05/staining-and-dying-wood-with-mike-mascelli

0:00 - Intro
2:00 - Ben's new tablesaw
16:14 - Milling thin stock
25:39 - Tiny pieces of ebony
33:43 - Segments
57:52 - Why don't you like combo machines?

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited


Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page. Sign up now! Join deputy editor Jon Binzen for a fascinating look at less-familiar furniture of the Arts and Crafts era.


Direct download: shop-talk-live-episode-268.mp3
Category:general -- posted at: 10:56am EDT

Larissa Huff wows Vic and Ben with her harrowing tales of freehand letter routing and many other woodworking feats.

This episode is sponsored by Shaper and Pony/Jorgensen

0:00 - Intro
15:23 - Different edge treatments
26:07 - Leveling an outfeed table
40:26 - All time favorite tools
51:42 - Larissa loves routers!
1:04:49 - Shaping an anticlastic curve

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited


Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

 

Direct download: shop-talk-live-episode-267.mp3
Category:general -- posted at: 10:45am EDT

Links from this episode can be found here - http://www.shoptalklive.com   

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter   

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited


Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

 

Direct download: shop-talk-live-episode-266.mp3
Category:general -- posted at: 10:00am EDT

This episode is sponsored by Triton Tools

0:00 - Intro
7:25 - Segment potpurri
12:40 - Shop flooring
20:17 - The carriage maker's plane
22:41 - Workbench height
34:08 - Milling lumber in advance
48:23 - Using epoxy

Links from this episode can be found here - http://www.shoptalklive.com   

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter   

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited


Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Direct download: shop-talk-live-episode-265-2.mp3
Category:general -- posted at: 10:45am EDT

Wilbur Pan wears many hats. It's just that sometimes those hats are a white coat, or a community organizing pin, or a shop apron. A full-on M.D., Ph.D, Wilbur's spent over 20 years in oncology, including almost 18 treating kids. As an FWW editor once put it, "He's basically a superhero." He's also a tool nut and science nerd, two passions that seem to feed into each other. Indeed, he may be the only podcast guess to say, "I know just enough metallurgy to get me into trouble." His particular tool nuttiness is for Japanese tools, which are on display above his bench. For years he's run the blog giant Cypress, a tremendous resource for learning more about Japanese tools whether it's which ryoba to buy first or why Japanese tools are tools, not mystical magic wands.

Links from this episode can be found here - http://www.shoptalklive.com   

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter   

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited


Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Direct download: shop-talk-live-episode-264.mp3
Category:general -- posted at: 11:44am EDT

Thanks to our shop launch partner Grizzly Industrial for sponsoring this episode.

This episode was also sponsored by Pony/Jorgensen

For more information on our newest online course: https://finewoodworking.mykajabi.com/

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited


 Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

 

Direct download: shop-talk-live-episode-263.mp3
Category:general -- posted at: 10:11am EDT

Sponsored by the Northwest Woodworking Studio's Online Mastery Program: http://www.Northwestwoodworking.com

Bill Pavlak's blog: https://www.finewoodworking.com/2022/03/22/new-shops-and-old-movies

0:00 - Intro
1:18 - Random talking and old tools
11:07 - Professional woodworking?
20:46 - How flat is flat enough before planing?
33:58 - Dovetails in thin stock
45:07 - Smooth moves
1:03:48 - How accurate is acceptable?

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited


Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

 

Direct download: shop-talk-live-episode-262.mp3
Category:general -- posted at: 11:49am EDT

This interview is was done in 2019, and originally posted to FineWoodworking.com in 2020. It's new to the podcast audience and we thought the world could use a dose of Russ Filbeck right now.

For more information on Russ and to get a copy of his incredible book on ladder back chair making - https://russfilbeck.com/

Links from this episode can be found here - http://www.shoptalklive.com   

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter   

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited


Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Direct download: shop-talk-live-episode-261.mp3
Category:general -- posted at: 10:37am EDT

Sign up here to be notified when registration opens for our newest online Foundations course, SketchUp Fundamentals for Furniture Design With Dave Richards - https://www.foundationsofwoodworking.com/sketchup

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited


Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Direct download: shop-talk-live-episode-260.mp3
Category:general -- posted at: 10:15am EDT

Sign up here to be notified when registration opens for our newest online Foundations course, SketchUp Fundamentals for Furniture Design With Dave Richards - https://www.foundationsofwoodworking.com/sketchup
 
Links from this episode can be found here - http://www.shoptalklive.com
 
Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter
 
Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Direct download: shop-talk-live-episode-260.mp3
Category:general -- posted at: 10:15am EDT

Rollie Johnson answers a batch of listener questions about dust collectors, homemade bandsaws, tool steel, cutter speed, power feeders, classic furniture drawings, machine restoration, and drying lumber.

This episode is sponsored by Mortise and Tenon Magazine - https://www.mortiseandtenonmag.com/

0:00 - Intro
3:17 - One stage vs. two stage dust collectors
11:59 - Should I make a bandsaw or buy one?
18:55 - Why aren't chisels and planes made of high-speed steel?
22:37 - How does speed affect cut quality?
29:32 - Uses for a power feeder
37:20 - What to do with all these machines?
45:16 - Furniture drawings
50:33 - Using a greenhouse as a lumber kiln

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited


Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Direct download: shop-talk-live-episode-259.mp3
Category:general -- posted at: 11:55am EDT

Woodworker, artist, and author, Danielle Rose Byrd joins Barry and Ben to discuss greenwoodworking techniques and culture, taking care of your body, wood allergies, sharpening, and how to find your own style.

This episode is sponsored by Peters Valley - http://petersvalley.org/

Denatured alcohol is getting harder to find these days. Help us, help other woodworkers find this workshop staple. https://www.finewoodworking.com/2022/01/28/survey-the-hunt-for-denatured-alcohol

0:00 - Intro
2:09 - Power tools in greenwoodworking
5:42 - Self care and blowing up spots
26:49 - Wood and nut allergies
38:44 - Coming up with a style
56:11 - Sharpening a tertiary bevel?

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited


Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Direct download: shop-talk-live-episode-258.mp3
Category:general -- posted at: 11:08am EDT

This episode is sponsored by Peters Valley - http://petersvalley.org/

0:00 - Intro
1:26 - Shop resolutions
9:41 - Budget tablesaw woes
22:05 - Building a base for a bandsaw?
35:21 - Segments
47:55 - Finer furniture pads
56:28 - Milling lumber for a workbench by hand

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited


Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.


Direct download: shop-talk-live-episode-257.mp3
Category:general -- posted at: 11:09am EDT

1